~
4-BANK CHROMIUM-6 REMOVAL SYSTEM Removes Chromium-6 and other toxic chemicals
Tyent CHROMIUM-6 FILTER REMOVAL SYSTEM
THIS SYSTEM WORKS AS A STAND-ALONE WATER PURIFICATION SYSTEM OR WITH A TYENT WATER IONIZER OR ANY OTHER WATER IONIZER MODEL (with 1/4" water tubing).
SYSTEM DIMENSIONS, SETUP & CONFIGURATION:
• Excellent water treatment equipment pre-treats with or without a Water Ionizer, pre-treat refrigerator water, etc.
• Housing Unit comes with filters pre-installed
• System Dimensions: 15” LENGTH x 15” HIGH x 5” WIDE (may be installed underneath your kitchen counter)
• WATER FLOW :: FLOURIDE PRE-FILTER IN – STAGE 3 OUT
• FLUORIDE REMOVAL IS ACHIEVED BY UTILIZING THE ADVANCED MEDIA TECHNOLOGY OF THE FOLLOWING:
• SIR-900: A SYNTHETIC ALUMINUM OXIDE THAT IS PROCESSED TO HAVE MINIMUM FINES AND OTHER FOREIGN MATTER. CARTRIDGE REMOVES FLUORIDE BY A CHEMICAL REACTION WITH THE MEDIA. IT HAS MINIMAL SHRINKAGE/SWELLING AND LOW PRESSURE LOSS. PRODUCT IS PHYSICALLY STABLE AND CAN BE USED WITH A LARGE RANGE OF PH. IT HAS MINIMAL SHRINKAGE/SWELLING AND LOW PRESSURE LOSS.
• STAGE 1 & STAGE 2 FILTRATION:
• STRONG ANION EXCHANGE RESIN: DESIGNED FOR THE REMOVAL OF CHROMIUM 6. THIS MEDIA IS A HIGH CAPACITY, SUPPLIED IN CHLORIDE OR HYDROXIDE FORM.
• STAGE 3 FILTRATION: KDF55 COMBINED WITH CATALYTIC CARBON FOR REDUCTION OF THE FOLLOWING:
• KDF55: REMOVES HEAVY METALS SUCH AS (LEAD, MERCURY, NICKEL), CHLORINE, ACTS AS A BACTERIA AND SCALE CONTROL MEDIA.
• CATALYTIC CARBON: REMOVES IRON, HYDROGEN SULFIDE, MANGANESE, CHLORAMINES.
• Set up details and instructions included with each shipment.
• Replacement filter cartridges have a limited service life of approximately 700 gallons.
• We recommend that you change the filters approximately every 6 months, or if you notice changes in taste, color or flow of the water being filtered.
• Ships within the USA Continental 48 States. Please Contact Us for shipping cost to AK, HI, PR.
TYENT FILTERS, THE MOST TRUSTED FILTER SYSTEMS AVAILABLE TODAY!
~ 4-Bank Replacement Filters
4-Bank Replacement Filters (set of 4) Removes Chromium-6, Fluoride, Heavy Metals, etc. ($189.95)
TYENT CHROMIUM-6 FILTER Replacement
• Replacement filter cartridges have a limited service life of approximately 6 months (700 gallons).
• We recommend that you change the filters every 6 months, or if you notice changes in taste, color or flow of the water being filtered.
• Ships within the USA Continental 48 States. Please Contact Us for shipping cost to AK, HI, PR.
ACCESSORIES
Tyent Scale Remover
Was $̶2̶9̶9̶ - NOW ON SALE! $249.00
This little wonder Removes Hard Water Scale Buildup to prolong the life of your water ionizer!
Maintaining a good cleaning program for your water ionizer
To protect your investment we recommend you clean your water ionizer regularly with the Tyent Scale Remover!
Hard Water and the problem with Calcium and Lime buildup
Calcium and lime are accumulated, and it turns the water cell, which is for electrolysis clogged and white. Due to this, the water is not ionized, and it causes water cell to breakdown or malfunction. The sale affects pH, ORP, and hydrogen concentration of water, and it interferes the effectiveness of water ionizer. The scale is accumulated in the pope, and it reduces the water flow rate and causes clogging.
You can easily solve the problem of hard water scale buildup with the all new, Tyent Scale Remover
The Tyent Scale remover can be used with any Tyent Water Ionizer model. Water Ionizer models outside the Tyent brand may also find benefit from our scale removal system. (Contact Us if you have any questions.)
~
Tyent Cleaning Cartridge ($54.95)
A Citric Acid Ionizer Cleaning Cartridge is a MUST-HAVE in areas with extremely bad source water! It's designed to both descale the plates located in the water cell as well as prevent future scaling! This product is designed for use with Tyent Models Only. (Choose your Model when adding to your shopping cart.)
~
Upgraded Counter-top diverter valve with universal connectors. ($40.00)
• Faucet Adapter Kit - Includes Universal Connectors
• To be used on a standard kitchen faucet
~
Under-Counter Diverter Valve ($30.00)
We highly recommend purchasing this item! This T-Adapters allows you to connect your counter top water ionizer directly to the water source underneath your sink. The installation may take a few mins longer than installing a typical counter-top diverter valve but is well worth the time and dollars spent. Once installed, you now only have to touch the screen and water flow will start instantly. No need to adjust the water every time like you have to do with the kitchen sink water diverter valve. (Item shipped may look different than the photo shown here but functionality is the same.)
~
Cell Safe Anti-Scale Pre-filter ($79.99)
Stop hard water mineral buildup such as calcium carbonate (lime scale) from ruining your water ionizer and reducing its effectiveness. This composite pre-filter not only prevents scaling, but it actually eliminates scale build-up, improving the health and longevity of your Water Ionizer using a 1/4" water line. Cell Safe (™) is an inline filter that helps eliminate scale build up.
INSTALLATION INSTRUCTIONS
1. Remove the plugs at each end of the filter by pressing down on the flange around the outside of each port at the ends of the filter.
2. You can then install your 1/4 inch hose in each end. Be sure that the flow direction arrow is pointing towards the input side of the unit. The flow direction is there to show you how the water flows through the filter.
3. During the installation process, be sure to flush filter with water to check flow and remove any sediment in filter and to activate filter media before connecting to ionizer.
4. Replace every 6 months.
~
Soft Water Buddy Pre-Filter ($54.99)
A soft water buddy used with a water ionizer using a 1/4" water line and serves as a remineralizing filter for people who have or use a water softener, for soft water and especially for people who have a reverse osmosis unit.
Ingredients of filtration media consists of 50% Calcite and 50% Corosex.
Calcite is a crushed and screened white marble media which can be used to neutralize acidic or low pH waters to a neutral, less corrosive effluent.
Clack Corosex® is a specially processed hard, bead-like magnesia adapted for use in filters to neutralize acidity by increasing the pH value.
Certified to ANSI/NSF Standard 60
INSTALLATION INSTRUCTIONS
- Remove the plugs at each end of the filter by pressing down on the flange around the outside of each port at the ends of the filter.
- You can then install your 1/4 inch hose in each end. Be sure that the flow direction arrow is pointing towards the input side of the unit. The flow direction is there to show you how the water flows through the filter.
- During the installation process, be sure to flush filter with water to check flow and remove any sediment in filter and to activate filter media before connecting to your Water Ionizer.
~
pH Test Kit ($26.95)
The pH Test kit comes as shown with drops, mini test bottle and pH chart. In white storage box.